Vanak Limestone Quarry, Selections & Project Supply
Vanak Limestone is quarried in the Vanak region of Semirom, south of Isfahan. This guide brings the quarry source, cream color selections, available finishes, production formats and project-specification considerations together in one place.
- Location
- Semirom Isfahan
- Distance
- 150 km south of Isfahan
- Quarry Area
- 2 km² approx.
- Proven Reserve
- 1M t approx.
Vanak Limestone Quarry from Semirom, Isfahan
The quarry is located in the Vanak region of Semirom, approximately 150 kilometers south of Isfahan. The current Karimi Stone quarry page states a proven reserve of about one million tons across an area of roughly two square kilometers.
Vanak, Semirom
The quarry source is in the Semirom region of Isfahan Province, Iran. Quarry origin is important because it connects the finished product to a defined material source.
≈ 1,000,000 t
The stated proven reserve provides a long-term material base. Project availability still depends on the required selection, block dimensions, production schedule and quarry conditions.
≈ 2 km²
A large quarry area can contain visual variation between benches and blocks. Project selection should therefore be based on representative material rather than one isolated sample.
Domestic + Export
The quarry page identifies separate block selections for domestic and export supply. Final project sorting should be agreed according to appearance, dimensions and production requirements.
Vanak Limestone two main cream selections
The current material is grouped into Plain Cream and Wavy Cream. The difference is primarily visual: one selection aims for a quieter background, while the other accepts more directional movement.
Plain Cream
A calmer cream selection with less directional movement. It is a useful starting point for projects that need larger visually continuous surfaces and a more controlled background.
- Visual direction
- Uniform · calm · low movement
- Consider for
- Large wall fields · façades · flooring · repeated modules
- Approve
- Background tone, permitted markings and batch-to-batch range
Wavy Cream
A cream selection with more visible directional movement. Cutting direction and installation layout become more important when the project intends to use that natural movement as part of the architectural pattern.
- Visual direction
- Linear · active · directional
- Consider for
- Feature walls · façades · book-matched or directional layouts
- Approve
- Vein direction, movement range, panel orientation and sequence
“Plain” and “Wavy” are selection descriptions, not absolute visual guarantees. Natural limestone varies. For project orders, approve a representative range or mock-up and define the accepted color, movement, markings and orientation before full production.
Vanak Limestone Finishes from smooth to textured
The existing Vanak page lists polished, honed, sandblasted, bush-hammered and tumbled processing. Finish choice should be coordinated with the exact application, required texture and project sample.
Polished
Smooth · reflectiveIncreases surface reflection and usually deepens the perceived cream tone and natural markings.
Honed
Smooth · matteReduces gloss while maintaining a controlled, even surface for architectural applications.
Sandblasted
Fine texture · matteCreates a granular surface and changes how light is scattered across the limestone.
Bush-Hammered
Relief · strong textureMechanical impact produces a more pronounced surface relief suited to selected exterior and design applications.
Tumbled
Soft edges · aged effectRounds edges and softens the surface character, commonly associated with smaller-format or intentionally aged designs.
Compare Karimi Stone surface-processing categories and project selection guidance.
Vanak Limestone from block to project dimensions
The current Vanak page identifies tiles, slabs, pattern sets and free lengths as available formats. Final dimensions and thickness should be coordinated with stone selection, finish, application and fabrication.
Tiles
Regular modular sizes for flooring, wall cladding and repeated architectural grids.
Slabs
Larger pieces for custom cutting, walls, floors, stairs and fabricated project elements.
Pattern Sets
Coordinated modules for repeated flooring or landscape patterns where multiple sizes form one layout.
Free Lengths
Length-variable production used where fixed-width pieces are cut or optimized according to project needs.
Where Vanak Limestone can be considered
Application suitability should be confirmed for the exact material, finish and project conditions. The options below are practical starting points rather than universal performance claims.
Façades & Wall Cladding
Cream limestone can provide a restrained architectural field for exterior or interior walls. For façades, verify thickness, fixing system, absorption, climate and panel engineering.
Flooring
Honed and other appropriate finishes can be considered for floors after reviewing traffic, abrasion, friction, substrate, thickness and maintenance requirements.
Outdoor Areas
Sandblasted or bush-hammered options may be considered for selected exterior and landscape uses. Climate, drainage and the actual stone performance must still be checked.
Steps & Details
The material can be fabricated into steps and architectural pieces where dimensions, edge profiles, load conditions and installation details are coordinated before production.
Carving & CNC
Limestone workability can support carved and machined details. Geometry, minimum sections, vein direction, tolerances and handling should be reviewed before fabrication.
Feature Surfaces
Wavy selections can be used where directional movement is intentional. Layout, cutting direction and panel sequence should be defined from approved samples.
Compare stone selection criteria for walls, floors, façades, wet areas, paving and custom pieces.
Specify the Material beyond the stone name
The quarry name identifies the material source. A purchase or project specification should go further and define the selection, finish, dimensions, tolerance and acceptance criteria.
Selection
Plain Cream or Wavy Cream, plus the accepted background tone, movement and natural markings.
Finish
Define polished, honed, sandblasted, bush-hammered, tumbled or another approved processing reference.
Dimensions
Specify length, width, thickness, quantity, tolerances and whether pieces are tiles, slabs, free lengths or custom cut-to-size.
Orientation
For directional material, define cutting direction and installation orientation before production starts.
Application
State interior/exterior location, vertical/horizontal use, climate, traffic, wet exposure and installation system.
Acceptance
Approve representative samples or a mock-up and document visual range, dimensional QC and finish consistency.
Where performance matters, review available test data for the exact stone and evaluate absorption, strength, abrasion, freeze-thaw or other criteria relevant to the intended use.
Vanak Limestone through the production workflow
Project consistency is created through coordinated selection and production—not by quarry name alone. Each stage should carry the approved material range forward.
Identify suitable blocks and the required Plain or Wavy visual range.
Coordinate cutting direction, dimensions, thickness and surface processing.
Check visual selection, dimensions, finish and project acceptance criteria.
Prepare export packing and coordinate loading and delivery requirements.
Vanak Limestone Frequently Asked Questions
Practical information for architects, contractors and buyers evaluating Vanak Limestone for a project.
Where is the Vanak Limestone quarry located?
The quarry is in the Vanak region of Semirom, approximately 150 kilometers south of Isfahan, Iran.
What are the main Vanak Limestone color selections?
The current quarry page identifies two main selections: Plain Cream and Wavy Cream. Project orders should define the accepted visual range with representative samples.
Which surface finishes are available for Vanak Limestone?
The current quarry page lists polished, honed, sandblasted, bush-hammered and tumbled processing. Additional project processing should be confirmed before specification.
Which Vanak Limestone formats are available?
The current page identifies tiles, slabs, pattern sets and free lengths. Custom dimensions and other fabricated pieces can be reviewed according to the order.
Can Vanak Limestone be used for façades and exterior projects?
It can be considered for selected exterior applications, but final suitability should be verified for the exact stone selection, finish, climate, thickness, fixing system and relevant technical requirements.
How should the material be approved for a large project?
Approve a representative range or mock-up rather than one ideal sample. Define color, movement, finish, dimensions, orientation and acceptable production variation before full production.
Need this Limestone for a project?
Send the required selection, application, finish, dimensions, thickness, quantity, drawings and delivery destination. We can review material availability and production requirements with you.